SII IP-6600-01 Manual de Instruções descarregar pdf (Página 28)

28

7 DoorCom DCA 740-01 8 DoorCom IP

Factory setting

IPVS 600-...

The DoorCom Analog DCA 740-...

is used as an interface between

DoorCom IP and an analog tel-

ephone connection of a telecommu-

nication system.

It is possible to assign the maximum

number of possible users in a line to

the DCA 740-... . The functionality

depends in the main on the capa-

bility of the telephone system /on

the telephones connected to it.

Assignments and functionality

for calls via the DCA 740-... are

saved in the SII 650-... . This can

be programmed using BPS 650-...

if the connection via DCA 740-... is

selected.

The selection of users and control

and switching functions takes place

by means of DTMF dialling. The

telecommunications system and the

connected telephones must there-

fore possess DTMF dialling capability.

Power supply

The DCA 740-... is supplied directly

from the SIVS 610-... . A separate

supply is consequently not required.

The power to the a/b public net-

work interface is supplied from the

telecommunication system or the

a/b public network connection from

the exchange. It is not possible to

connect an individual public network

telephone directly to the a/b line of

the DCA 740.

With the reset button at the

IPVS600-..., it can be reset to the

as-delivered status. It is essential to

load the Siedle factory configuration

in the IPVS600-... after a reset.

Proceed as follows.

1 Start the Internet Explorer on the

PC and enter the following in the

address line:

http://192.168.0.1

The IP settings in the as-delivered

status of the IPVS610-...

User name: Service

Password: None issued on

delivery

The user interface is opened.

2 Select the Expert mode menu

item

3 Under Expert mode select the

menu point Maintenance.

4 Under Configuration select

"Search“ to find the configuration

file and select.

The file is on the supplied CD.

5 Select the file rtc_image.

6 Start the update with "Upload".

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários